Wood-based Panels

Today, beautiful furniture can be made not only of wood. For its production and use wooden boards. The use of this material is distributed in many modern industries. This is primarily associated with its high performance qualities. Virtually all wood stoves are the sheet material obtained by molding with subsequent drying is used mass pre- impregnated with synthetic polymers. To improve the water resistance of products in this mixture is added paraffin wax or other substances with similar properties. They are made of wood unbusinesslike, croaker, reiki, sawdust and shavings, wood chips, paper recycling, as well as flax and hemp chaff, corn stalks, sunflower. This product allows efficient use of waste products.

In the construction industry for heat and acoustic insulation products used in the volumetric weight of 250-350 kg/m3. Application of hdf plates much faster finishing. Manufacture them is composed of the following operations: preparation of wood chips and grinding on the fiber; impregnated fibreboard mass communication; molding plates, drying them, trimming. Dimensions and main indicators of physical and mechanical properties of these products are set appropriate standards. hdf boards used as a carrier element for laminate and other floor coverings.

They are used in furniture manufacturing as the rear wall of furniture and bed base, as well as for other purposes. Raw materials for production of this products are only environmentally friendly materials. They have been thoroughly tested and only allowed to use. Full heat and sound insulation of walls, partitions, ceilings intercommunication residential buildings, roofs and floors of industrial buildings can provide particle boards. They are produced by hot pressing of wood chips, soaked in synthetic polymers. During hot pressing, liquid polymer hardens, gluing the chips into a monolithic mass. Depending on the degree of compaction in the pressing plate can be obtained for various volume weight. In most cases, apply light particle boards with a bulk density of 250-400 kg/m3. Their length generally does not exceed 360 cm, width 120-180 cm, thickness of 13 mm to 25 mm. To date, these insulation products have a very high level of demand. Attach them to walls and ceilings with galvanized nails or glued mastic.